Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   talking metrics! (http://www.fornobravo.com/forum/f6/talking-metrics-4430.html)

Masako Morishita 06-30-2008 06:59 AM

talking metrics!
 
konnichiwa!
from Kobe,Japan
I'm planning to build a pompeii oven in my garden and I'm wondering if any of you has the schematics in metrics ,say an 80. cm internal diameter dome?
At this point I'm gathering as much info as possible before I jump into the DIY ocean!
Any help are much appreciated.
Arigato.

Masako Morishita 06-30-2008 07:04 AM

Re: talking metrics!
 
[QUOTE=Masako Morishita;36250]konnichiwa!
from Kobe,Japan
I'm planning to build a pompeii oven in my garden and I'm wondering if any of you has the schematics in metrics ,say an 80. cm internal diameter dome?
At this point I'm gathering as much info as possible before I jump into the DIY ocean!
Any help are much appreciated.
Arigato.

jengineer 06-30-2008 07:07 AM

Re: talking metrics!
 
Wow it has been a while since I looked at the electronic version of the plans. Go to the shopping area and sign in the plans are free but you have to order them. I know that when a group of members were attempting to update them they were making an effort to include proper units. I am not sure if they made it or not.

If the plans do not include both units it is not too tough to make the conversion. The plan measurements are minimums when it comes to the base and hearth and some folks have added in a few more inches/cm to both.

je

CajunKnight 06-30-2008 07:47 AM

Re: talking metrics!
 
Here is a nice little online tool you can work with for conversions. Good luck.

>:: World Wide Metric ::<


All times are GMT -7. The time now is 03:30 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC