Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Soliciting feedback on metal stand for corner install (http://www.fornobravo.com/forum/f6/soliciting-feedback-metal-stand-corner-install-16231.html)

afinpdx 06-28-2011 12:52 PM

Soliciting feedback on metal stand for corner install
 
2 Attachment(s)
Hello
Im planning for an outdoor corner install of a Casa2G90 stove. After much consideration of masonry vs. metal stand, I decided to try to design a metal stand. Im not a metalworker, though I am a woodworker with friends who weld. At least they are friends for now.

So I put together a design and Im hoping to get some feedback from the forum. I know there are quite a few people out there who have built their own metal stands and Id appreciate any advice you might have.

A few notes about the materials:
  • The uprights are 3x3 steel tube (1/4 thickness)
  • The rails are 2x2 steel tube (1/4 thickness)
  • The braces on the top are 1 x1 steel tube (1/8 thickness)
This was also a chance for me to learn to use Google SketchUp for doing 3D renderings. For free softwareits pretty darn cool.

Thanks for your help,
-adam


All times are GMT -7. The time now is 05:02 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC