Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Setting The Fire Brick Floor (http://www.fornobravo.com/forum/f6/setting-fire-brick-floor-20171.html)

SandySpringsPizza 11-29-2013 11:13 AM

Setting The Fire Brick Floor
 
I am beginning to lay my fire brick floor. I have made the paste of equal parts of fire clay and sand, but the brick remains loose after two days of curing. Is this to be a hard adhesive or just a soft bed for leveling the bricks?

UtahBeehiver 11-29-2013 11:37 AM

Re: Setting The Fire Brick Floor
 
Just leveling. You want the floor to float and not be tied to the bottom surface whether it be CaSi board, VCrete, PCrete or whatever you floor insulation is under the brick floor.

SandySpringsPizza 11-30-2013 04:06 AM

Re: Setting The Fire Brick Floor
 
thank you.

deejayoh 11-30-2013 09:45 AM

Re: Setting The Fire Brick Floor
 
Mark -
You should start a single thread for your build, rather than individual threads for each question. That's the easiest way to get advice as people will be subscribed and respond quickly

Gulf 11-30-2013 10:34 AM

Re: Setting The Fire Brick Floor
 
Quote:

Originally Posted by deejayoh (Post 166094)
Mark -
You should start a single thread for your build, rather than individual threads for each question. That's the easiest way to get advice as people will be subscribed and respond quickly

And include pics :).


All times are GMT -7. The time now is 05:25 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC