Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Pompei Oven CAD Drawings - Corner Installation (http://www.fornobravo.com/forum/f6/pompei-oven-cad-drawings-corner-installation-14518.html)

Neal 10-05-2010 11:33 AM

Pompei Oven CAD Drawings - Corner Installation
 
On pages 17 and 18 of the Version 2.0 Pompei Oven Instructions, there are some CAD drawings for the hearth and oven in a corner installation. The largest shown is for a 49" outside diameter oven. To my way of thinking, if you have
4.5" bricks on the opposite sides of the circle totaling 9", this drawing will yield an oven with a 40" diameter cooking surface. I assume that when FB refers to a 42" oven in their plans, they are talking about the cooking surface, which would require a 51" outside diameter and similarly increased hearth size. Is my thinking correct?

If so, does anyone have a CAD drawing of a corner hearth and oven in this configuration that they would like to share?


All times are GMT -7. The time now is 09:01 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC