Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   length of doorway and flu diameter? (http://www.fornobravo.com/forum/f6/length-doorway-flu-diameter-15301.html)

sonomacast 01-30-2011 12:35 PM

length of doorway and flu diameter?
 
Today I cut all the forms for a cast modular oven. I have decided to make it 1050mm (41") in diameter. 472mm dome height (18.5") with a door opening of 297mm (11.6") High. The doorway is a complete arch 558mm (22") wide. The vent landing is 610mm wide (24")
Basically the dome height is 90% of the radius of the oven floor and the door height is 63% of the dome height. All walls are 75mm thick (3").

Now my query is this. What diameter should my flu be for a 1050 (41") Oven and what would be the best length of the landing?

Thank you

sonomacast 02-04-2011 02:20 AM

Re: length of doorway and flu diameter?
 
Is it correct that the correct flue size is 10% of the door size squared.
eg, my door is 22" x 11.6" = 225.2"square. so my flue should be 22.5" square= a flue of 5".......................Is this correct?


All times are GMT -7. The time now is 01:56 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC