Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Help Needed!!! Newbie Trying to design a Pompeii Oven. (http://www.fornobravo.com/forum/f6/help-needed-newbie-trying-design-pompeii-13157.html)

Rino C 06-04-2010 10:26 AM

Help Needed!!! Newbie Trying to design a Pompeii Oven.
 
Hello,

I'm new to the forum and I'm looking for any help/advice I can get.

I plan on building a mobile Pompeii Oven. I have an old steel crate pallet that I found which would make the perfect base once I weld some castors to it. The problem is my total surface area I can build on is 1440mm x 1110mm (Roughly 4'-8" x 3'-7"). A 36" oven does not fit so I was wondering if someone could help me with the over all measurments & Specs for a 30" Interior Diameter Oven, or an oven size that would work better with this platform.

How high would the vault have to be?
What are the opening widths & heights?
How big of a vent landing should be used?

Any help would be greatly appreciated! I can't wait to get this project started.

Thank you,

-Rino


All times are GMT -7. The time now is 01:15 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC