Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   FB Board to concrete slab (http://www.fornobravo.com/forum/f6/fb-board-concrete-slab-8519.html)

ERASMO 10-28-2009 04:39 PM

FB Board to concrete slab
 
I was searching the forum and was looking for the best material to adhere the FB Board to my already cured precast hearth slab.

jmhepworth 10-28-2009 05:18 PM

Re: FB Board to concrete slab
 
Just set it there. When the oven is on it, gravity keeps it all in place. No need for any adhesive.

Joe

ThisOldGarageNJ 10-28-2009 06:35 PM

Re: FB Board to concrete slab
 
unless you have some kind of leveling problem, I agree with joe, the weight of the floor and dome is not gonna let it go anywhere and no need for anything underneath...
cheers
Mark

dmun 10-28-2009 07:34 PM

Re: FB Board to concrete slab
 
I set my insulating boards (insblock19) into my wet concrete, which isn't a choice for you. If the boards don't sit flat, you can use the fireclay/sand mixture to level them, but as Joe and Mark said, gravity always wins.


All times are GMT -7. The time now is 09:52 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC