Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Design Help (http://www.fornobravo.com/forum/f6/design-help-16739.html)

andycase 09-21-2011 03:49 AM

Design Help
 
Hi All
Will be sitting my oven on a sleeper base, with paving slab top.
I want to put an enclosure around it and loose fill with insulation. However i don't want to do it out of something heavy like brick, i want to build a timber one.
If the oven is thick, and insulated, will the heat be ok with the timber? I don't mind it getting warm , i just don't want to call the fire brigade!

HeidiL2011 09-21-2011 08:17 AM

Re: Design Help
 
Hello Andycase,

We do not recommend nor approve of using any wood in the design of the stand/base or the enclosure.

Thanks,
Heidi

andycase 09-21-2011 11:41 AM

Re: Design Help
 
Hi
Thanks for replying.
Wood being used in the base won't be a problem as it will be topped with concrete and also reinforced with threaded bar to make it secure
Heat will not touch the wood base.

My enquiry is specifically regards heat transfer through the done of the oven. With several inches of insulation will the wooden housing be affected?


All times are GMT -7. The time now is 06:33 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC