Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Getting Started (http://www.fornobravo.com/forum/f6/)
-   -   Chimney transition (http://www.fornobravo.com/forum/f6/chimney-transition-14751.html)

azpizzanut 11-14-2010 09:00 AM

Chimney transition
 
Hello All,

One step closer to completion now. The clay tile chimney is installed and I've placed brick around it to within a few inches of the top. Should I use Portland mortar to fill the transition to repel water or is there a preferred method and material to put there? It seems like every brick chimney I've seen has cracks and gaps at this "brick to tile" area. I'd just like to do it right before moving on to the next task.

I'd appreciate your advice.

Cheers

Neil2 11-14-2010 02:55 PM

Re: Chimney transition
 
Ordinary portland mortar. If you have a piece of WWF (re-bar mesh) around, take it apart and form a "ring" that you can embed in this layer of mortar.

azpizzanut 11-16-2010 07:47 AM

Re: Chimney transition
 
Thank you Neil2.

Cheers,


All times are GMT -7. The time now is 07:13 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC