Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Regional Forums > Australia

Like Tree8Likes

Reply
 
LinkBack Thread Tools Display Modes
  #71  
Old 05-03-2013, 05:15 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

55mm and if i had known that I had to cut both angle's off I would'nt have got them.
Reply With Quote
  #72  
Old 05-03-2013, 05:24 AM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,021
Default Re: Wood fired oven corner build in Grafton NSW

Hi Wayne

So are you cutting them back to square?

I'm using 65mm and not doing that they form my dome almost exactly [save for 1 course at 65mm and 2 courses @ 75] and save me cutting that angle any way allowing minimal mortar joints [I believe].
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by oasiscdm; 05-03-2013 at 05:33 AM.
Reply With Quote
  #73  
Old 05-03-2013, 07:30 AM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,908
Default Re: Wood fired oven corner build in Grafton NSW

Colin,

Every build is different so the spreadsheet/table just gets in the ball park. I also remember near the last few course I used this process from Texman to help me refine the bevel and taper cuts. See if this help, I had to read if many times but finally the light bulb went on and I think I used this process for the last two courses.

http://www.fornobravo.com/forum/8/te...tml#post133889 (Texman Build)
__________________
Russell

Experiences are the names I call my mistakes!

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.


My Picassa Picture Log
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #74  
Old 05-03-2013, 04:57 PM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

Quote:
Originally Posted by oasiscdm View Post
Hi Wayne

So are you cutting them back to square?

I'm using 65mm and not doing that they form my dome almost exactly [save for 1 course at 65mm and 2 courses @ 75] and save me cutting that angle any way allowing minimal mortar joints [I believe].
I cut both sides but still leave some angle.

Your done well I wish it had been that easy for me.
Reply With Quote
  #75  
Old 05-04-2013, 02:16 PM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

Just had to redo the last coase my tool was off acouple of mm in length, causing the last coase of bricks drop down acouple of mm.
Long story short had to redo the last coase.
addzzz likes this.
Reply With Quote
  #76  
Old 05-08-2013, 03:18 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

Almost done withe the dome!



The surpport for the last coase




at this piont I tried to rub the mortar into the joins but It didn't work and I had to set the bricks one at a time.

Last edited by Wayne73; 05-08-2013 at 03:34 AM.
Reply With Quote
  #77  
Old 05-08-2013, 03:24 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

And now ready for the key stone but the hole is bigger then one brick, I will have to improvise.





from the inside

Reply With Quote
  #78  
Old 05-08-2013, 03:48 AM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,787
Default Re: Wood fired oven corner build in Grafton NSW

Wayne,
I know it's not easy and too late now, but there are quite a number of coinciding vertical joins of four courses of bricks. I hope they don't give you trouble. Hopefully ok because the dome is stronger in the top half.
Reply With Quote
  #79  
Old 05-08-2013, 03:58 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 2,383
Default Re: Wood fired oven corner build in Grafton NSW

Quote:
Originally Posted by Wayne73 View Post
And now ready for the key stone but the hole is bigger then one brick, I will have to improvise.





from the inside

Gudday
The view I'm getting now is the outside. What about the size inside? Would that be smaller than a brick? Get somone to hold a bit of cardboard up on the inside and copy from the top with a pencil and find out the shape and size ?
Go from there
Regards dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #80  
Old 05-08-2013, 04:25 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

yep thats the idea ..though one brick on its end want fill the gap, Ill have to use two or three
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Mobile Brick Oven Wood Fired Brick Oven Bob Commercial Pizza Ovens 21 12-28-2012 03:56 PM
Mobile Wood Fired Oven for sale Brick Oven Bob Barter, Trade and Sell 2 09-14-2012 09:24 PM
refractory cast wood fired oven vantheman Other Oven Types 6 08-28-2012 02:59 PM
Utility Trailer Cast Oven Build johngalt Other Oven Types 11 05-03-2011 08:17 AM
One half of L for Wood Fired Oven bnairuni Newbie Forum 1 04-27-2011 05:47 AM


All times are GMT -7. The time now is 02:58 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC