Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Regional Forums > Australia

Like Tree8Likes

Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 02-21-2013, 03:07 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

I just thorght it would be easier to start them that way and I didn't think I would have to cut an angle at the top because of the arch bricks im using.
Ok having said that if I cut them in half and lay them horizontal them from the start, I would be better off cutting the tapper off then reversing every 2nd brick ?

Last edited by Wayne73; 02-21-2013 at 03:14 AM.
Reply With Quote
  #22  
Old 02-24-2013, 03:54 PM
Master Builder
 
Join Date: Jan 2012
Location: Australia
Posts: 853
Default Re: Wood fired oven corner build in Grafton NSW

WaynE

Noticed On The News That Grafton Is Flooded Hope You And Family Are All OK And On High Ground

Stay Safe
__________________
Cheers Colin

My Build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #23  
Old 02-25-2013, 12:10 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

No problems here at the moment Colin, im still here cleaning bricks
Reply With Quote
  #24  
Old 03-17-2013, 11:24 PM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

I got hold of a brick saw off a friend of a friend and I can have it as long as I need.
So at this stage Ive marked and cut the oven floor, Ive got plenty of bricks so I was able to stand them on there side for the extra themal mass.
One thing I'm not sure of is the length of is the arch bricks, is a full brick, half a brick or somthing inbetween?
Attached Thumbnails
Wood fired oven corner build in Grafton NSW-img_0356.jpg   Wood fired oven corner build in Grafton NSW-img_0358.jpg  

Last edited by Wayne73; 03-17-2013 at 11:33 PM.
Reply With Quote
  #25  
Old 03-18-2013, 09:33 PM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

I ended up going with half a brick for the inner arch and have done a dry run just to see how it looks.
Still haven't leveled the floor yet, will have a go at it when Ive got plenty of time hopefully Thursday.
Attached Thumbnails
Wood fired oven corner build in Grafton NSW-img_0361.jpg   Wood fired oven corner build in Grafton NSW-img_0359.jpg  
Reply With Quote
  #26  
Old 03-19-2013, 01:05 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

Thank's Doug,
I was a bit unsure about that and how it was all going to tie in myself.
I'll try and get my head around it tomorrow.
Cheers

Last edited by Wayne73; 03-19-2013 at 01:25 AM.
Reply With Quote
  #27  
Old 03-20-2013, 12:15 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

Hey Doug, I made some changers, does this look like it will work?
Attached Thumbnails
Wood fired oven corner build in Grafton NSW-img_0364.jpg   Wood fired oven corner build in Grafton NSW-img_0365.jpg  
Reply With Quote
  #28  
Old 04-03-2013, 01:27 AM
Wayne73's Avatar
Apprentice
 
Join Date: Oct 2012
Location: Australia
Posts: 123
Default Re: Wood fired oven corner build in Grafton NSW

I found getting the floor level a real b1tch, it took me about five goes but I got then in the end.
I had enough full bricks to do the 1st coase and now down to my arch bricks,which I have to cut both angles off so that really slows things down.

Anyway I'm slowly progressing.

Reply With Quote
  #29  
Old 04-03-2013, 02:27 AM
cobblerdave's Avatar
Il Pizzaiolo
 
Join Date: Jan 2010
Location: brisbane australia
Posts: 1,984
Thumbs up Re: Wood fired oven corner build in Grafton NSW

Gudday
Slows good.... That's a very neat job you have done there! Just take your time it'll get there

Regards dave
__________________
Measure twice
Cut once
Fit in position with largest hammer

My Build

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

My Door

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by cobblerdave; 04-03-2013 at 02:29 AM. Reason: Speeling... Doesn't like "your "does it
Reply With Quote
  #30  
Old 04-03-2013, 02:56 AM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,516
Default Re: Wood fired oven corner build in Grafton NSW

Igloo or doghouse Wayne?
If an igloo it looks like you are going to have some difficulty doing the rendered outer shell at the back.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
For Sale: Mobile Brick Oven Wood Fired Brick Oven Bob Commercial Pizza Ovens 21 12-28-2012 03:56 PM
Mobile Wood Fired Oven for sale Brick Oven Bob Barter, Trade and Sell 2 09-14-2012 09:24 PM
refractory cast wood fired oven vantheman Other Oven Types 6 08-28-2012 02:59 PM
Utility Trailer Cast Oven Build johngalt Other Oven Types 11 05-03-2011 08:17 AM
One half of L for Wood Fired Oven bnairuni Newbie Forum 1 04-27-2011 05:47 AM


All times are GMT -7. The time now is 06:35 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC