Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Australia (http://www.fornobravo.com/forum/f51/)
-   -   Newbie Oven build melbourne (http://www.fornobravo.com/forum/f51/newbie-oven-build-melbourne-20070.html)

Awild8 10-26-2013 11:56 PM

Newbie Oven build melbourne
 
1 Attachment(s)
Started my base today, it's been a long time in the wait and probably a long time build. Having only Sundays to work on it will take a while, but the fun begins.:cool:

oasiscdm 10-27-2013 02:32 AM

Re: Newbie Oven build melbourne
 
Hi awild

Hey is your name Andy or Andrew. I used to work with an Andrew Wild. where in Melbourne

Looks good. keep the photos coming.

Awild8 10-27-2013 02:57 AM

Re: Newbie Oven build melbourne
 
Sorry my names Nick my that's my number plates. Cheers

oasiscdm 10-27-2013 03:26 AM

Re: Newbie Oven build melbourne
 
Hi Nick

Thx for that - enjoy the build.

UtahBeehiver 10-27-2013 07:46 AM

Re: Newbie Oven build melbourne
 
Awild,

Welcome from the other side of the hemisphere. There are quite a gang of Aussies to help you with supply sources as well as the rest of us if you have any questions. Looking forward to seeing your build. Very nice looking corner build similar to what I did. Good luck.

Awild8 10-27-2013 05:03 PM

Re: Newbie Oven build melbourne
 
5 Attachment(s)
Justa few more pics of the base and the stainless steel spit I will be installing inbuilt on the side of the oven base. Great to get some messages from guys all over the world wishing me luck. Thanks to everyone, hope I get the time to finish the build this year.

david s 10-27-2013 08:21 PM

Re: Newbie Oven build melbourne
 
Did you check with your council about the location of the oven in relation to the boundary fence? It would be a pity, if your neighbour has issues they might be able to force you to pull it down or never allow you light it again.

Awild8 10-27-2013 10:36 PM

Re: Newbie Oven build melbourne
 
Hi David, Ye I did its ok cause the neighbor has a garage against my fence, so they said it was fine with no permit needed

brickie in oz 10-27-2013 11:00 PM

Re: Newbie Oven build melbourne
 
You can build right on the boundary as long as the building material is fireproof. Ya have to love Vic dont ya.....:p

Welcome aboard too.....:cool:

Awild8 10-27-2013 11:15 PM

Re: Newbie Oven build melbourne
 
thanks brickie..... cant get past the Victorians, dying breed we are :D

Im actually building a outdoor entertainment area once the oven is done and the entire back yard will be enclosed. As for the permits I will need one for that and the inspector did say I should clad the wall with fire rated cement sheet around the oven and BBQ area. but that could be years away....... my backs killing me after mixing 18 mags of cement on the weekend to core fill the besser blocks. Glad I had a family member that has a concrete mixer I will use for the slab.


All times are GMT -7. The time now is 11:44 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC