Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Regional Forums > Australia

Like Tree4Likes

Reply
 
LinkBack Thread Tools Display Modes
  #31  
Old 10-12-2013, 05:20 PM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,552
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Dan,

Looks like you are still using full width bricks which are fine and long as you can make it work but probably will need to cut the width down as you go up and the radius of the dome gets smaller. You will know when you need to do this.
Reply With Quote
  #32  
Old 10-12-2013, 05:53 PM
Serf
 
Join Date: Jun 2012
Location: Melbourne; Australia
Posts: 17
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Hey UtahBeehiver, the bricks are already cut in half? they are about 105mm on the faces you see looking from the inside.

Quote:
Originally Posted by UtahBeehiver View Post
Dan,

Looks like you are still using full width bricks which are fine and long as you can make it work but probably will need to cut the width down as you go up and the radius of the dome gets smaller. You will know when you need to do this.
Reply With Quote
  #33  
Old 10-12-2013, 07:34 PM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,552
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Dan,

Think we are talking different dimensions, if your faces are 105mm roughly 4.1 inches on this side of the pond, you will probably need to cut the faces by 1/2 or 1/3s as you go up.
Reply With Quote
  #34  
Old 10-12-2013, 08:22 PM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,051
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Dan

I would be trying half and half for the bond all the way through. If you look at mine I started too Cut the bricks to keep the bond. Towards the top they got to narrow so I crossed two bricks and then began to use grinder to shape the rear of the brick to maintain that brick to brick fit as the bricks get vertical

If you want come over and check mine out before I plug it perhaps after work one night now daylight saving is with us. It's much easier to see in real life than to explain in writing.
vanoontour likes this.
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.

Last edited by oasiscdm; 10-12-2013 at 08:25 PM.
Reply With Quote
  #35  
Old 10-13-2013, 05:46 AM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,051
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Hi Dan Send a PM if you wish to come over. only night not good is Monday's
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #36  
Old 10-21-2013, 09:24 PM
Il Pizzaiolo
 
Join Date: Jan 2012
Location: Australia
Posts: 1,051
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Hey Dan. Did you get anything done on oven.
__________________
Cheers Colin


To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #37  
Old 10-21-2013, 10:19 PM
Serf
 
Join Date: Jun 2012
Location: Melbourne; Australia
Posts: 17
Default Re: 40" Corner oven in Manor Lakes - West Melbourne

Nah Mate, Uni got in the way...
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Why Italian Wood-Fired Ovens are Round james Newbie Forum 50 04-01-2014 10:14 PM
Finally finished corner 40" oven Loafin Brick Oven Photos 9 12-24-2010 08:30 AM
Cast Oven on Trailer Questions djag12 Other Oven Types 49 09-19-2010 08:03 PM
Door for bread baking??? heliman Hearth Bread and Flatbread 17 03-31-2010 11:34 AM
Why we did the Pompeii Oven james Introductions 0 03-21-2005 04:48 AM


All times are GMT -7. The time now is 04:24 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC