Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Western US (http://www.fornobravo.com/forum/f46/)
-   -   Utah Builders? (http://www.fornobravo.com/forum/f46/utah-builders-12607.html)

Derkp 04-13-2010 01:45 PM

Utah Builders?
 
Anybody out there in Utah?

Derk

UtahDave 04-14-2010 10:16 PM

Re: Utah Builders?
 
Yeah, we're here. Just finished an installation of an Artigiano as part of a covered outdoor patio. Haven't fired it up yet, but getting set to cure it asap.

Derkp 04-15-2010 09:26 AM

Re: Utah Builders?
 
Dave,

Do you know a supplier for fireclay here locally? or Heat Stop mortar?
Thanks
Derk

UtahDave 04-15-2010 09:10 PM

Re: Utah Builders?
 
There's a brick place in south salt lake, on main or west temple as I recall. They had firebrick and I think heat resistant mortar, but I'm not sure. I'll think on it some more and see if I can remember anything else.

gbohnstedt 04-22-2010 02:45 PM

Re: Utah Builders?
 
Derk,

I checked everywhere, and so did my mason. The best we could find was low-duty and they didn't even have them in stock. I've found a distributor for blanket insulation, but the prices were significantly more than FB. I finally gave up on sourcing materials locally and ordered the Pompeii kit from FB. Lehi will soon have its first Pompeii WFO.

Greg

jmhepworth 06-27-2010 05:26 AM

Re: Utah Builders?
 
Derk,

Somehow I missed your post. There are actually several ovens in Utah. I know this doesn't help you, since you already bought the kit (which is what I would do if I were doing it again), I bought my firebrick from Lehi Block, although they only carry splits the last time I asked. I bought more from Beuhner Block in SLC. I was not successful in finding any mortar, so I bought HS 50 from the manufacturer. They gave me a pretty good price. I still need to finish the exterior. Once we started cooking in it, the urgency to make it look good went way down.

jmhepworth 06-27-2010 05:28 AM

Re: Utah Builders?
 
Here's another Utah thread.

http://www.fornobravo.com/forum/f44/...vens-8264.html

FrankF 07-05-2010 05:04 AM

Re: Utah Builders?
 
If anyone needs any fire clay let me know. I have a bag and a half I'll let go for cheap.

stitman 08-17-2010 05:38 PM

Re: Utah Builders?
 
Do you still have your fireclay?

Derkp 08-18-2010 10:59 AM

Re: Utah Builders?
 
Yes I do.

Where are you located at?

Derk


All times are GMT -7. The time now is 08:25 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC