Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (
-   Outdoor Kitchen Design (
-   -   dusty O.D. kitchen progress (

dusty 04-29-2008 02:53 PM

dusty O.D. kitchen progress
5 Attachment(s)
The weather has been warm and I've returned to the back yard to finish my outdoor kitchen. The oven enclosure will be made of used bricks and the counters of old pool table slate - stong but VERY heavy. I have started the enclosure, but want to repair my two big cracks before I go any further. I plan to cut into the cracks with a diamond blade on my angle grinder from the inside and outside. On the inside I plan to fill the cut groves with mortar squeezed out of my grout bag. I will fill the outside ones with furnace caulk and fire-brick wedges. I will let you all know how it works out.

Took some pictures of my sons welding the supports for my counters. Then of the counters on either side of the oven.

The last pic is of my enclosure walls being narrowed to make room for adaquate insulation. This was what Uno suggested I do back before I even started this project - I miss that guy.

Uno, you still out there?


Ken524 04-29-2008 03:10 PM

Re: dusty O.D. kitchen progress
Beautiful work, Dusty. I love the pool table slate!

All times are GMT -7. The time now is 08:47 AM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC