Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Introductions (http://www.fornobravo.com/forum/f3/)
-   -   Help (http://www.fornobravo.com/forum/f3/help-14841.html)

waza 11-30-2010 01:56 PM

Help
 
i was running my tandoor on gas, and it was ok but now i switched to lpg i have got no pressure in the tandoor, whats wrong?.

C5dad 11-30-2010 06:58 PM

Re: Help
 
Have you checked your regulator to make sure it has the proper settings?? Also, did you check your lines for blockage. Otherwise, there is not enough info to respond.

Tscarborough 11-30-2010 07:09 PM

Re: Help
 
Natural gas and propane require different jets and inlets. You can not switch back and forth between the 2 (and may blow yourself in the attempt).

Neil2 12-01-2010 01:25 PM

Re: Help
 
One suggestion.

Don't title your thread "Help". Try a title that such as "Tandoor Gas Problem"

nissanneill 12-01-2010 03:31 PM

Re: Help
 
Wasa.
as Tscarborough has stated, you need to re-jet your burners as the jets are definitely different from the 2 different gases.
Decide what gas that you intend to stick with and ensure that the jets are correct for that fuel.
The regulator for the lpg should also be checked for the correct pressure

Cheers.

Neill

Tscarborough 12-01-2010 03:43 PM

Re: Help
 
More importantly, LPG is heavier than air, while NG is lighter, so there is always the danger of it pooling in a low spot (like a tandoori oven) and exploding. Best to stick with the NG.


All times are GMT -7. The time now is 05:44 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC