Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Introductions (http://www.fornobravo.com/forum/f3/)
-   -   Hello from NSW Australia (http://www.fornobravo.com/forum/f3/hello-nsw-australia-18570.html)

Wayne73 10-31-2012 06:19 PM

Hello from NSW Australia
 
hello people,:)
I've been talking to the wife about building a wood fired pizza oven for a number of years now and today I finely got the OK.
I have a small idea about howto go about building an oven from this forum and Youtube.
Anyway this is what I got to work with.

http://i14.photobucket.com/albums/a3...3/P1010698.jpg

I want to build my oven in this corner.

http://i14.photobucket.com/albums/a3...3/P1010697.jpg

BOOMERS WFO 11-01-2012 09:20 AM

Re: Hello from NSW Australia
 
Welcome Wayne.

A WFO will look smick in that corner. What size oven are you looking at building?

Provide some dimensions and the suggestions will come.
The FB instuctions will assist you in the build, and the wonderful people on this forum will make the process so much simpler.

Good Luck.

Cheers

Boomer

Wayne73 11-02-2012 12:44 AM

Re: Hello from NSW Australia
 
From the wall to the BBQ is 2.1 meters and from the back wall to the end of the bench is 2.3 meters.

http://i14.photobucket.com/albums/a3.../Ph1010697.jpg

UtahBeehiver 11-02-2012 11:44 AM

Re: Hello from NSW Australia
 
wayne,
Looks like there is room for a corner build to me. You can look at my thread for an idea for one. There are a fair number of corner builds on the forum. Good luck

BOOMERS WFO 11-02-2012 05:21 PM

Re: Hello from NSW Australia
 
Hi Wayne,

The footprint of my base to my corner build is approximately 1600/1700mm and that takes a large oven 1100mm(43inch based on fornos corner build plans).

So you would certainly have room for a substantial oven should require it, and still not impact on the other BBQ area.

I am doing a corner build. Have a look in the Australian Forum for images. Oven build in Adealide BOOMERS WFO.

http://www.fornobravo.com/forum/f51/...ide-17878.html

Good Luck

Craig

Wayne73 11-02-2012 05:44 PM

Re: Hello from NSW Australia
 
thanks guys,The fit was my main concern.
where do I find the Forno plans?

brickie in oz 11-02-2012 08:31 PM

Re: Hello from NSW Australia
 
Quote:

Originally Posted by Wayne73 (Post 141444)
thanks guys,The fit was my main concern.
where do I find the Forno plans?

Do a google, because we live 'Stralia we cant download the plans off this site. :)

Wayne73 11-02-2012 08:39 PM

Re: Hello from NSW Australia
 
Hey Craig, your build is just what im after and your base looks simple enough to build and I think would suit my corner.
Just a question about your besser blocks what size are they?400 x 200?
If they are do these measurements look correct or similar to your base?
http://i14.photobucket.com/albums/a330/wayne73/slab.jpg

cobblerdave 11-03-2012 02:58 AM

Re: Hello from NSW Australia
 
Quote:

Originally Posted by brickie in oz (Post 141452)
Do a google, because we live 'Stralia we cant download the plans off this site. :)

The only way I know to get the plans of the site is to go to the store place a free copy of the plans in your trolley and forno will send a pdf attachment by e-mail.

Regards Dave

Wayne73 11-03-2012 04:06 AM

Re: Hello from NSW Australia
 
Thanks Dave,I'll check it out.


All times are GMT -7. The time now is 01:23 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC