Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Introductions (http://www.fornobravo.com/forum/f3/)
-   -   Building in Millbrae Ca (http://www.fornobravo.com/forum/f3/building-millbrae-ca-5923.html)

jerrycook 01-10-2009 01:31 PM

Building in Millbrae Ca
 
We have started our 42" Pompeii oven in Millbrae. we have the slab built. We used 90lb. sacks of pre-mixed concrete. Rented a small mixer from Home Depot. Mixing and pouring took about four hours. The slab looks really good. We're planning on drilling and epoxying rebar into the slab where the blocks will be filled. This being earthquake territory and all. We also plan to extend the rebar 2" above the top of the last course to tie into the hearth slab and support the rebar for the hearth.

exceloven 01-10-2009 05:35 PM

Re: Building in Millbrae Ca
 
Jerry, Welcome! Congrats on your start. Post pix as you progress.

Mark


All times are GMT -7. The time now is 02:34 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC