Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Tools, Tips and Techniques (http://www.fornobravo.com/forum/f28/)
-   -   What NOT to do when building the wall (http://www.fornobravo.com/forum/f28/what-not-do-when-building-wall-19659.html)

Cyungle 07-15-2013 07:13 PM

What NOT to do when building the wall
 
1 Attachment(s)
Never place anything smaller than the block cavity hole on the edge of an unfilled cavity unless you have someone handy who has really long and skinny arms who can reach down and retrieve it.

Good bye, trusty tape measure. You have served me well.

stonecutter 07-15-2013 07:38 PM

Re: What NOT to do when building the wall
 
Unless it was a fat-max..then you should knock a hole through the cell and get it.

Tscarborough 07-16-2013 09:29 AM

Re: What NOT to do when building the wall
 
That just means that you are not drinking enough beer. Those cells should be full of empties.

TxTanner 08-04-2013 09:24 PM

Re: What NOT to do when building the wall
 
Tape measures are the best tool ever invented to fish out tape measures.That's why they put that thing that looks like a belt clip on them.Now if they would just put a GPS location device on them.

Bill

nissanneill 08-05-2013 04:25 AM

Re: What NOT to do when building the wall
 
Get yourself a good rare earth magnet on a long pole or cord and retrieve it.
I do this all the time, in fact some automotive spare parts outlets sell them on telescopic wands.
You will need to attach it to the metal end tang but a good magnet should attract the metal tape through a plastic body.


All times are GMT -7. The time now is 04:55 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC