Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Pizza Oven Design and Installation > Tools, Tips and Techniques

Like Tree1Likes

Reply
 
LinkBack Thread Tools Display Modes
  #11  
Old 08-15-2013, 06:09 PM
david s's Avatar
Il Pizzaiolo
 
Join Date: Mar 2007
Location: Townsville, Nth Queensland,Australia
Posts: 4,855
Default Re: Tool for moving fire/brushing cooking surface.

[QUOTE=Dazmac;159531]
Quote:
Originally Posted by david s View Post
I found 1.2 mm is the right thickness for Stainless too. QUOTE]

David,

So 1.2mm has been ok? a lot of the tools that you buy use 1.5mm but 1.2 is easier to come by as scraps so keen to know if it is lasting the distance and not to flimsy
Stainless is really tough stuff. I do sharpen the leading edge so the stainless peel can also be used to load the pizza on to rather than using a wooden peel for placing. Stainless will not wear down like aluminium will, but because it is harder it is more difficult to work. Either stainless or aluminium work well, just depends what you can obtain cheaply. Not sure how thick road signs are.
Reply With Quote
  #12  
Old 08-15-2013, 06:16 PM
Laurentius's Avatar
Master Builder
 
Join Date: Nov 2010
Location: Japan
Posts: 870
Default Re: Tool for moving fire/brushing cooking surface.

All accessible(available to claim on dark isolated roads) road signs in the USA are perforated with bullet holes.
Reply With Quote
  #13  
Old 08-15-2013, 07:26 PM
mrchipster's Avatar
Il Pizzaiolo
 
Join Date: Apr 2010
Location: Minneapolis, MN USA
Posts: 1,260
Default Re: Tool for moving fire/brushing cooking surface.

Quote:
Originally Posted by Laurentius View Post
All accessible(available to claim on dark isolated roads) road signs in the USA are perforated with bullet holes.
In Wisconsin they also come with a $10,000 fine.
__________________
Chip
Reply With Quote
  #14  
Old 08-15-2013, 10:42 PM
Laurentius's Avatar
Master Builder
 
Join Date: Nov 2010
Location: Japan
Posts: 870
Default Re: Tool for moving fire/brushing cooking surface.

I'm not advocating going out pilfering road signs. David, wasn't sure how thick they were, so I just chided in with some of the vast useless information that in my head.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
steel cooking surface Lill Dave Introductions 3 09-20-2011 08:25 PM
First course on or around cooking surface? Neal Newbie Forum 5 10-12-2010 03:36 PM
Cooking surface in the WFO lwood Pizza Stone Baking 2 09-03-2009 05:18 AM
stainless steel cooking surface mhannawa Getting Started 0 08-19-2009 01:52 PM
39.3" round cooking surface oven Questions? southpaw Pompeii Oven Construction 1 02-01-2006 01:41 PM


All times are GMT -7. The time now is 01:16 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC