Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Tools, Tips and Techniques (http://www.fornobravo.com/forum/f28/)
-   -   Stucco Over Angle Iron (http://www.fornobravo.com/forum/f28/stucco-over-angle-iron-13182.html)

Anders 06-08-2010 12:53 PM

Stucco Over Angle Iron
 
I have finished installing my oven and I am about to apply a stucco finish to both the oven and the stand. I have constructed the stand out of cinder blocks (as instructed in the FB oven installation manuals) and have used 2" angle iron to support the blocks over the opening for wood storage.

I imagine applying the stucco directly over the exposed metal angle iron will be a problem, as I am concerned that it will not adhere properly. Does anyone have any recommendations here?

Tscarborough 06-08-2010 01:04 PM

Re: Stucco Over Angle Iron
 
You will need to apply lath over that area, and lap it well onto the CMU.

Anders 06-08-2010 01:55 PM

Re: Stucco Over Angle Iron
 
Tscarborough,

Thanks for the reply. Any recommendations for affixing the lathe over the angle iron/ CMU?

Much appreciated.

Tscarborough 06-08-2010 02:03 PM

Re: Stucco Over Angle Iron
 
Concrete nails into the joints.

Anders 06-08-2010 02:15 PM

Re: Stucco Over Angle Iron
 
Ahhh...perfect. Thanks again

Les 06-08-2010 03:05 PM

Re: Stucco Over Angle Iron
 
Quote:

Originally Posted by Anders (Post 91812)
Tscarborough,

CMU?

Concrete Masonry Unit (your blocks)

Les...


All times are GMT -7. The time now is 05:46 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC