Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Tools, Tips and Techniques (http://www.fornobravo.com/forum/f28/)
-   -   A plug for HFTools (http://www.fornobravo.com/forum/f28/plug-hftools-7030.html)

jcg31 06-17-2009 06:05 AM

A plug for HFTools
 
I bought my wetsaw from Harbor Freight Tools in August of 2007. With the normal cost I plunked down the extra $30 for the extended warranty. I used if for my entire build cutting both angles and bevels on each brick and then lent it to a fellow fornobravoer for his entire build. Last weekend while doing some fascade work the little pump (probably a $7.00 item) started making noises like it was on its last leg. I called HFT and asked if they would replace the pump. The manager insisted that rather than exchange the pump that I bring the saw back for a full replacement. Nice!
Jim


All times are GMT -7. The time now is 11:28 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC