Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Tools, Tips and Techniques (http://www.fornobravo.com/forum/f28/)
-   -   Buy the Harbor Freight extended warranty!!! (http://www.fornobravo.com/forum/f28/buy-harbor-freight-extended-warranty-9450.html)

kebwi 12-13-2009 04:42 PM

Buy the Harbor Freight extended warranty!!!
 
2 Attachment(s)
Well, I broke my HF tile saw. As you can see in the photos, the spindle on the motor end is fine but the spindle on the blade end is shot. It just spun itself to bits. I was sawing along, then a bunch of clattering, then it was over. The blade still spins because the belt drive has a lot of tension but it obviously won't "push" through brick anymore. It's done for.

Luckily, I purchase the $20 1-year replacement plan when I bought the saw. I already called HF and they said they would just send me home with a new one. The only expense is the incredible hassle of packing a filthy 150lb saw and driving it all over Seattle for a long evening.

Look folks, HF is cheap Chinese crap and we all know it. There's nothing wrong with that so long as it you take in stride.

Put differently...cough up for the replacement plan. You will not regret it!

Cheers!

fxpose 12-13-2009 05:27 PM

Re: Buy the Harbor Freight extended warranty!!!
 
Bummer... Looks like the locking pin/wedge became loose and came off. Were you able to find it?

kebwi 12-13-2009 05:40 PM

Re: Buy the Harbor Freight extended warranty!!!
 
I assumed that piece disintegrated. I heard a clatter right as things went south, so maybe instead of breaking, it simply popped out and shot off somewhere. I could look around my basement a bit I suppose. I dunno.

Tscarborough 12-13-2009 05:58 PM

Re: Buy the Harbor Freight extended warranty!!!
 
That is not broken. it will cost about a nickel to fix.

Edit-what it indicates is that you are probably putting too much pressure on the blade. Let it work at it's own pace, the saw and the blade will last longer.

kebwi 12-13-2009 06:19 PM

Re: Buy the Harbor Freight extended warranty!!!
 
Fair enough. I concede that it looks like a very simple repair. Neil2 and I came to the same conclusion in my oven thread. Problem is, I'm not sure how to approach it. Where do I get that piece? HF had no interest in repairing it. They seem to consider any repair worth less than the cost of the the overhead.

I'll do a little research, but if you know offhand where to get the "key" as I think it is called, I would be open to suggestions.

...and point taken on taking pressure off the blade. Maybe I got too ambitious.

Thanks.

Looks like HF has a way to order parts. It's interesting that they had no interest in pursuing that course when I called. I'll have to see what it costs of course. Since the replacement plan is already paid for, it isn't in my interest to pay *too* much for the repair except that, as you say, it would be absurd to replace the saw under under such circumstances.

Tscarborough 12-13-2009 06:34 PM

Re: Buy the Harbor Freight extended warranty!!!
 
Just go to any hardware store or big box and buy a piece of keyway. It is probably 3/16, but you should measure it to be sure. It will be in the bolts and screw section.

shuboyje 12-13-2009 06:38 PM

Re: Buy the Harbor Freight extended warranty!!!
 
It's called Key stock. You should be able to find what you need here:

Order , COLD ROLL STEEL, Mild Steel, STAINLESS, STEEL KEY STOCK, STEP Alloys 1018, 300 SERIES, Steel in Small Quantities at OnlineMetals.com

jbriggs 12-13-2009 06:44 PM

Re: Buy the Harbor Freight extended warranty!!!
 
It looks as if the woodruff key is missing, or has walked out the shaft and flung (technical term!) across the room. There is probabally a set-screw in the "v" portion of the belt pulley that holds in the key and it might have been loose and allowed the key to walk out. Very simple fix. Either get a new key or some key stock and a new set-screw, apply loctite (superglue will work if you don't have loctite) and you are back in buisness.

If you are not sure the size (could be metric), try to disassemble the opposite side and see if that key fits the other end, and if it does the take it with you to Lowes/HD and use it to match up a new one.

Good luck!

kebwi 12-13-2009 06:45 PM

Re: Buy the Harbor Freight extended warranty!!!
 
Cool, I'll look into that. The exact part description is C5x30. I don't know what the C means. I'm guessing the 5x30 is width/length in mm.

kebwi 12-13-2009 06:47 PM

Re: Buy the Harbor Freight extended warranty!!!
 
How do I realign the two halves of the hole (that's a funny play on words). The belt is very tight. I'm not sure I can turn the shaft or the belt independent of one another with my hands.


All times are GMT -7. The time now is 01:15 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC