Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Tools, Tips and Techniques (http://www.fornobravo.com/forum/f28/)
-   -   Angleizer free Windows Software (http://www.fornobravo.com/forum/f28/angleizer-free-windows-software-17942.html)

u863583 06-21-2012 08:29 AM

Angleizer free Windows Software
 
2 Attachment(s)
General tools has a product called Angleizer that has been mentioned on this site previously. Available from their website is a free Windows software program that can be used to calculate brick cuts for Bullseye, Semi Circular Arch and Axed Arch. The software can be downloaded from the following link.

General Tools and Instruments

Select download button on that page and download the zip file. The file will need to be unzipped to a location of your choosing and you will need to run the autorun.exe program to start the software. The software is pretty easy to use. May be helpful to some users wishing to calculate number of bricks needed for a run and bevel cuts. A couple of screen shot examples are attached of how the software looks.

Manny

Dagored154 07-21-2012 04:28 AM

Re: Angleizer free Windows Software
 
thanks for the great tip. i will get one of those this weekend.


All times are GMT -7. The time now is 07:20 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC