 Re: The vent and oven draw
James, probalby been asked elsewhere but I can't locate it. Are there "best practice" dimensions for vent and flue"? My vent opening is 19" x 4", nearly the entire width of the arc and reduces down to accomodate an 8"x12"x24" flue. At this point (two days of curing fires) I am not particularly impressed with my draw. Certainly not the show you describe above. I am wondering if extending the flue (by adding another 24" length), reducing the size down to 8"x8" or both would help the draw. Any thoughts?
Thanks for any help.
Jim
Last edited by jcg31 : 03-01-2008 at 12:48 AM.
|