 Re: Chimney attachment
Thanks George and Jim. The previous posts from Ken524 were useful. Jim, what is a "chase"? I saw one guys post saying that he would put chicken wire around the pipe, then high heat mortar and then stucco. I appreciate your point that you may want some gap between the steel and the bond for air movement, however.
From Ken 524's description, the duravent chimney attaches to the plate on the top of the vent, but some portion of it extends down into the vent. Since the plate is 12X12, do I want to cut the bricks in the vent to create a 9X9 hole so the pipe can fit?
Jim |