Thread: Vent finished
View Single Post
  #6 (permalink)  
Old 12-13-2007, 03:38 AM
jcg31's Avatar
jcg31 jcg31 is offline
Apprentice
 
Join Date: Aug 2007
Location: Sherwood, Wisconsin
Posts: 151
Default Re: Vent finished

Just went out to check. I have one of those two-halogen work lights that you can get at most homecenters for $29. IInitially started with both lamps on but Wayne suggested that that might be a bit overkill if not damaging to the recently applied mortar. So I cut back to one.

This evening it is 15 degrees (F) out. With the dome complete, cladding in place. I also have a piece of insulation board blocking the front of the arch so the only opening is the chimney. The temps measured are identified in the illustration below. Interestingly until you asked I had never looked at it this way, my interest was just to keep the outside temps well above 40, which we have been able to to accomplish with the one light in outdoor temps as low as -8F.

Quote:
Originally Posted by waynebergman View Post
Looks real nice Jim. I like the idea of the halogen lightl. Can you tell me how how hot the inside of the oven get with this light on....thanks wayne

Jim Iam also wondering about the issues with curing or the info you have that you are mentioning here about dave and kens oven. ....thanks wayne
Attached Thumbnails
You must be a registered user to view attachments. Click to register. It's easy.
Reply With Quote