Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Good Background Information > Brick Oven Photos

Like Tree11Likes

Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 06-11-2013, 01:26 PM
hodgey1's Avatar
Journeyman
 
Join Date: May 2013
Location: NW Pennsylvania USA
Posts: 328
Default Re: Starting 42" NW Pensylvania

Thanks again for all the tips!!!!!!!!!
Reply With Quote
  #22  
Old 06-13-2013, 08:43 AM
boylanta's Avatar
Apprentice
 
Join Date: Mar 2012
Location: Solon, OH
Posts: 204
Default Re: Starting 42" NW Pensylvania

Chris,
You had asked me about my roof pitch.
I confirmed it's 8.5/12, in case you still need this.
__________________
Todd

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #23  
Old 06-24-2013, 05:29 AM
hodgey1's Avatar
Journeyman
 
Join Date: May 2013
Location: NW Pennsylvania USA
Posts: 328
Default Re: Starting 42" NW Pensylvania

Continued progress.
Attached Thumbnails
Starting 42" NW Pensylvania-img_1730-large-.jpg   Starting 42" NW Pensylvania-img_1745.jpg-2-large-.jpg   Starting 42" NW Pensylvania-img_1746.jpg-2-large-.jpg   Starting 42" NW Pensylvania-img_1747.jpg-2-large-.jpg   Starting 42" NW Pensylvania-img_1748-large-.jpg  

Starting 42" NW Pensylvania-img_1752-large-.jpg  
Reply With Quote
  #24  
Old 06-24-2013, 05:31 AM
hodgey1's Avatar
Journeyman
 
Join Date: May 2013
Location: NW Pennsylvania USA
Posts: 328
Default Re: Starting 42" NW Pensylvania

More pictures of progress
Attached Thumbnails
Starting 42" NW Pensylvania-img_1754-large-.jpg   Starting 42" NW Pensylvania-img_1761-large-.jpg  
Reply With Quote
  #25  
Old 06-24-2013, 07:45 AM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,564
Default Re: Starting 42" NW Pensylvania

Coming along nicely. Just an observation, keep an eye out vertical joints lining up from one course to another.
Reply With Quote
  #26  
Old 06-24-2013, 09:41 AM
boylanta's Avatar
Apprentice
 
Join Date: Mar 2012
Location: Solon, OH
Posts: 204
Default Re: Starting 42" NW Pensylvania

Nice tight joints Chris.
Are you cutting mitre & bevel angles on each brick.
It's difficult to tell w/ the first few chains, since the angle & bevel are so shallow.
Nice work.
__________________
Todd

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #27  
Old 06-24-2013, 05:53 PM
hodgey1's Avatar
Journeyman
 
Join Date: May 2013
Location: NW Pennsylvania USA
Posts: 328
Default Re: Starting 42" NW Pensylvania

Russell, should I cut the brick to avoid the ocasional verticle joint?

Todd, I opted to use the square bricks due to what seemed at the time along with all the other hurdles I faced to be too much of a challenge. I am now seeing that it would have been very doable had I just put my mind to it. Things are going pretty good and not as daunting as I assumed. I think I'll do the tapered bricks on my next build :-)

Chris
Reply With Quote
  #28  
Old 06-24-2013, 06:15 PM
UtahBeehiver's Avatar
Il Pizzaiolo
 
Join Date: May 2012
Location: Salt Lake City, Utah
Posts: 1,564
Default Re: Starting 42" NW Pensylvania

Cutting a brick to help you maintain bond works just dont make too small aka a "chip" you can make adj in the front 1/3 of dome and it will never be seen.
Reply With Quote
  #29  
Old 06-24-2013, 06:23 PM
Gulf's Avatar
Il Pizzaiolo
 
Join Date: Sep 2011
Location: Mississippi
Posts: 1,680
Default Re: Starting 42" NW Pensylvania

Hodgey1,
What is in the middle of your oven Post 24, Pic #2?. I may have missed something, since I just tuned in
__________________

To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.



To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #30  
Old 06-24-2013, 06:47 PM
hodgey1's Avatar
Journeyman
 
Join Date: May 2013
Location: NW Pennsylvania USA
Posts: 328
Default Re: Starting 42" NW Pensylvania

Oh, that is a large old wash tub upside down to act as a peak to shed water off while it's tarped.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
May be starting my 42" Pompeii in NYC this week... NYC Pompeii Oven Construction 123 05-27-2012 11:04 AM
Finally Starting My 42" Manteca BarryKeith Pompeii Oven Construction 60 10-17-2011 08:31 AM
42" Oven doobie dee Pompeii Oven Construction 54 07-27-2011 05:10 PM
Just starting out. trenchn Introductions 4 10-07-2007 12:20 AM
Just starting out. trenchn Introductions 0 10-05-2007 08:55 AM


All times are GMT -7. The time now is 12:36 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC