Nearly completed oven in Adelaide, Australia

[Cdubs]

Thanks Nathan...that is a perfect picture. Still a little cold in NJ so I won't be able to start on mine for a couple of months.

[Grunt44]

HI
I just wondering about how you did the flue thru the roof , I will be doing a similar thing but thru a metal roof also on an angle.
Grant
Sydney Aust

[NathanC]

Hi Grant

The shop I ordered my Casa2g90 from also supplied the fluekit - it was about $550 which after looking at ebay may have been overpriced. Once we had the kit it was just a matter of cutting a hole through the laserlight sheeting (in your case metal roof) and putting it up. I used a fire rated rooftite/decktite (bunnings) to seal and waterproof it.

Look for a kit like this on ebay:

Wood Heater FLUE KIT 6" Stainless Steel. BRAND NEW | eBay

[Grunt44]

Hi Nathan
Thanks for the quick reply , and the good info and the link to ebay . I have included a pic of my build , as you can see the metal roof that is part of a
6.5 m gable.
Thanks again
Grant

[earthfest]

wow that is way cool!!! this is a setup that I would someday like, for just a chill backyard bbq!