Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Good Background Information > Brick Oven Photos

Like Tree9Likes

Reply
 
LinkBack Thread Tools Display Modes
  #201  
Old 07-18-2014, 04:31 AM
boylanta's Avatar
Apprentice
 
Join Date: Mar 2012
Location: Solon, OH
Posts: 204
Default Re: My 42" Pompeii Oven build, Northeast Ohio

Hi Joe,
I have had some small amounts of mortar come out of a few joints as well, but I am not too concerned. I believe one of the best methods for climates like ours it to perform a few small curing fires again if you suspect moisture in the dome, especially during winter/spring when it's used less frequently.
As for adding more mortar, there are others better versed than me on that topic. I would search the forum.
But you could always fill the cracks again w/ mortar.
I used the homebrew mixture w/ good success.
What's the worst that happens, it falls out again?
Tks.

Todd Boyland
__________________
Todd

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #202  
Old 07-18-2014, 08:14 AM
Serf
 
Join Date: Aug 2013
Location: Northeast Ohio
Posts: 10
Default Re: My 42" Pompeii Oven build, Northeast Ohio

Thanks for your response. My biggest concern was heat loss, or even flame going up into the dome and having contact with the actual insulation blaket. Also, if excessive heat were getting into the dome without a place for it to be released, can enough presure build to where it would cause cracking or even explode. I have heard of them exploding. I don't know if that is a tall tail, but I can see how it may happen.
Reply With Quote
  #203  
Old 07-18-2014, 11:45 AM
boylanta's Avatar
Apprentice
 
Join Date: Mar 2012
Location: Solon, OH
Posts: 204
Default Re: My 42" Pompeii Oven build, Northeast Ohio

Joe,
If you used the ceramic fiber blanket (or substantial equivalent) recommended by FB you should be fine.
If memory serves me, it's good to 2800 or 3200 degrees.
Way above anything the oven will produce.
__________________
Todd

Link to my build -
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts.
Reply With Quote
  #204  
Old 07-19-2014, 05:57 PM
Serf
 
Join Date: Aug 2013
Location: Northeast Ohio
Posts: 10
Default Re: My 42" Pompeii Oven build, Northeast Ohio

Thanks Todd for your comments. I guess I'll fire it up and see what happens.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pompeii Oven with two openings??? Piet Pompeii Pompeii Oven Construction 29 01-20-2014 01:11 PM
Gardella 42" oven cgardella Pompeii Oven Construction 21 11-29-2012 02:22 PM
42" Pompeii WFO build (Tucson, Az) Please Critique Or Suggest breakn Pompeii Oven Construction 17 02-22-2011 11:13 PM
Corner Build Pompeii style oven with outdoor kitchen carneage Newbie Forum 0 08-20-2010 07:22 PM
Why we did the Pompeii Oven james Introductions 0 03-21-2005 03:48 AM


All times are GMT -7. The time now is 03:14 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC