Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Brick Oven Photos (http://www.fornobravo.com/forum/f21/)
-   -   Casa2G 100 build (http://www.fornobravo.com/forum/f21/casa2g-100-build-20464.html)

willruff425 03-13-2014 08:16 PM

Casa2G 100 build
 
We built a Casa2G oven in Snohomish County Washington. We had some small issues along the way but we worked through them. We're about to start curing the oven tomorrow. It's been a blast!

willruff425 03-16-2014 07:18 PM

Re: Casa2G 100 build
 
5 Attachment(s)
Our custom trailer arrived and it was looking good.:)

NCMan 03-17-2014 09:30 AM

Re: Casa2G 100 build
 
Looking good!! Keep us all posted w/your progress. What type of issues did you have?

willruff425 03-17-2014 02:44 PM

Re: Casa2G 100 build
 
we built a concrete base on the trailer.. And it was the wrong size so we had to modify that.. Measure twice theory!

willruff425 03-17-2014 03:00 PM

Re: Casa2G 100 build
 
5 Attachment(s)
Oven showed up boxed tight no damage or issues. So we got to work on the base of the oven. Set some rebar and poured some cement. It went as well as expected but we did measure wrong on the first pour and had to increase the size of the base.

willruff425 03-17-2014 03:21 PM

Re: Casa2G 100 build
 
5 Attachment(s)
Made sure everything fits correctly and put the high heat mortar on the dome. we were starting to get excited at this point.. Lots of fun!!1:D

willruff425 03-18-2014 04:41 PM

Re: Casa2G 100 build
 
6 Attachment(s)
spent a few days shopping for cooking supplies and stucco. If you have any questions about where to get supplies in seattle area please let me know.

willruff425 03-18-2014 04:49 PM

Re: Casa2G 100 build
 
6 Attachment(s)
Getting the oven ready for stucco at this point. Also went and picked up a clay chimney flute. Hard to find in this area! but, I got one. :p... Now! to put on the Stucco Base!!!!

willruff425 03-18-2014 04:58 PM

Re: Casa2G 100 build
 
6 Attachment(s)
Applied the stucco base and let it dry over night.. Then we added the stucco finish.. Coming along nicely at this point!!!:)

willruff425 03-18-2014 05:09 PM

Re: Casa2G 100 build
 
6 Attachment(s)
Next we worked on selecting some tile for the base and the mantel. We also had to build a mantel or deck for the oven. Next up mortar and grout!


All times are GMT -7. The time now is 11:53 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC