| Pizza Ovens | (800) 407-5119 | Info@fornobravo.com |
![]() |
| | |||||||
| | LinkBack | Thread Tools | Display Modes |
| ||||
| O.k. guys...I just found out that the hip bone is connected to the leg bone, the leg bone is connected to the knee bone, etc. etc. If your hip is crooked- your feet won't work! Take a look at this pic I've attached and see if you can spot my first mistake: See it? O.k. so I came to the realization before I started this project that there is no way a novice like me is going to end up with brick work like Les. As long as the dome doesn't cave in, I'll be a happy guy. I'm doing a lot of eyeballing rather than exact measuring. I'm covering it all with a gable house though- so only the inside needs to be presentable. I'm on my third course now (no pic of that yet) and as the course meets the arch, the left and right sides aren't even. In fact one side of the brick is dips into view slightly when looking through the arch. That's because when I first laid out the arch towers, rather than cut one of the soldier course bricks lengthwise, I cut the archtower to accomodate a full brick! Had I cut the full brick and left the two arch towers identical, the dome courses would be lining up. Nothing a grinder won't fix- but a good note for the other novices out there getting started not to make this mistake if you are going for a highly esthetic looking dome.
__________________ Check out my oven progress here: http://www.fornobravo.com/forum/phot...dex.php?u=4147 See ALL of my pictures here: http://picasaweb.google.com/Brevenc/...OutdoorKitchen |
| ||||
| Quote:
I'm betting Les can't cook!
__________________ Sharing life's positives and loving the slow food lane |
| ||||
| Quote:
Now that's funny.
__________________ My thread: http://www.fornobravo.com/forum/f8/d...ress-2476.html My costs: http://spreadsheets.google.com/pub?k...Xr0fvgxuh4s7Hw My pics: http://picasaweb.google.com/dawatsonator |
| ||||
| Steve- It's funny how the little things get erased as you move forward. By the time I went through all of the courses- it came out just fine. Never would have even noticed. In fact, there were a bunch of small mis calculations that never showed when all was said and done. Just too many good masons on here, I didn't want to embarass myself with shotty work.
__________________ Check out my oven progress here: http://www.fornobravo.com/forum/phot...dex.php?u=4147 See ALL of my pictures here: http://picasaweb.google.com/Brevenc/...OutdoorKitchen |
| Thread Tools | |
| Display Modes | |
| |
| | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Pompei oven progress from Carlo | biondoli | Pompeii Oven Construction | 57 | 06-02-2008 08:08 PM |
| infrared laser thermometers | Dutchoven | Tools, Tips and Techniques | 21 | 04-23-2008 04:55 PM |
| Is this ridge beam a mistake? | Marcel | Brick Oven Photos | 10 | 12-17-2005 04:17 PM |