#241  
Old 07-12-2012, 11:19 AM
Tscarborough's Avatar
Il Pizzaiolo
 
Join Date: Oct 2009
Location: Ausitn
Posts: 3,046
Default Re: It is begun

We drilled holes in the perimeter, then used a recip saw to rough it out and chisels and rasps to shape it into a slight cone, smaller at the top. We measured at the desired height to get the correct diameter, then made a template and slid it up and down the post, sanding the high points and dropped it over the top. The other end was too small for this, so both the pole and the bar were notched and through-bolted
Attached Thumbnails
It is begun-barhole.jpg  
Reply With Quote
  #242  
Old 07-12-2012, 11:22 AM
Tscarborough's Avatar
Il Pizzaiolo
 
Join Date: Oct 2009
Location: Ausitn
Posts: 3,046
Default Re: It is begun

I would treat pine, mine are cedar and pretty much rot proof already.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Timo's Ovenblog Has Begun timo Introductions 3 01-15-2011 07:23 AM
Got my FB board...Finally my oven has begun!! Matt916 Getting Started 6 09-15-2009 09:55 AM
Portable Forno Bravo in Boulder james Brick Oven Photos 35 01-23-2009 04:07 AM
Bellingham Bread Oven janprimus Brick Oven Photos 120 11-14-2007 09:09 PM


All times are GMT -7. The time now is 07:41 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC