Small cracks in Refractory Mortar
Hoping for some advice. I have assembled a Casa 2G90 and after firing it I am starting to see small cracks in the mortar on the joints. Followed the firing instructions and I do not think that I went too hot too soon. My thoughts are that I did not get the mortar mixed to the right consistency when I applied it. One of the spots where the mortar is cracking also seems to move when you push on it like there is an air pocket underneath. I have read some posts and understand that some cracking is normal but I am still at a point where I could try to remove and apply more mortar if that is necessary. Any tips would be good. I have attached a couple of pics.
Re: Small cracks in Refractory Mortar
From what I can see the mortared joint looks fine. Please call me at 1-800-407-5119 ext 14
|All times are GMT -7. The time now is 08:54 PM.|
Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
© 2006/10 Forno Bravo, LLC