Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Newbie Forum (http://www.fornobravo.com/forum/f2/)
-   -   New Oven (http://www.fornobravo.com/forum/f2/new-oven-19376.html)

trimmind 05-16-2013 06:15 AM

New Oven
 
1 Attachment(s)
I have just received my new primavera 60, is it typical to have a large gap between the fire bricks on the floor

Faith In Virginia 05-16-2013 02:41 PM

Re: New Oven
 
I would say no. Call FB for technical advice on that. It's hard to tell whats going on with just the one photo.

Hope that helps.

trimmind 05-16-2013 04:10 PM

Re: New Oven
 
4 Attachment(s)
I did and the response I got was this is normal because there ovens expand and contract, every oven I have ever seen doesn't look like this.
It appears to me that the floor brick was not cut right, here are a few more pictures,

Thanks

Tscarborough 05-16-2013 05:50 PM

Re: New Oven
 
No, that is too big.

jannello 06-05-2013 10:23 AM

Re: New Oven
 
How wide are the gaps between the oven wall and floor? I just received my Primavera 70. The floor is basically flush with the wall on one side and there is 1/2 to 3/4 inch gap on the other. Is this normal?

jannello 06-05-2013 10:37 AM

Re: New Oven
 
5 Attachment(s)
I recently received my Primavera 70. On one side the wall and floor are flush. On the other side there is a gap that is approx 1/2 to 3/4 inch.

brickie in oz 06-06-2013 01:27 AM

Re: New Oven
 
Quote:

Originally Posted by jannello (Post 154534)
I recently received my Primavera 70. On one side the wall and floor are flush. On the other side there is a gap that is approx 1/2 to 3/4 inch.

The gap is to allow for expansion, the gap needs to be even all around the oven, not just on one side. :)

trimmind 06-06-2013 04:15 AM

Re: New Oven
 
Those gaps are nothing like the size of mine, they look normal to me

brickie in oz 06-06-2013 04:24 AM

Re: New Oven
 
Quote:

Originally Posted by brickie in oz (Post 154599)
The gap is to allow for expansion, the gap needs to be even all around the oven, not just on one side. :)

Quote:

Originally Posted by trimmind (Post 154603)
Those gaps are nothing like the size of mine, they look normal to me

Have the gap all around the oven as its supposed to be rather than in just one place as you have it. :)


All times are GMT -7. The time now is 10:47 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC