Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Newbie Forum (http://www.fornobravo.com/forum/f2/)
-   -   Fireclay or Orcoset (http://www.fornobravo.com/forum/f2/fireclay-orcoset-16367.html)

HummerGB 07-16-2011 05:05 PM

Fireclay or Orcoset
 
I knew I would be on here sooner or later that I would be on here with a question. This is a great forum. I just poured the insulating layer today, also tried to buy my fire clay and this is what I ran into. In Green Bay the three brick suppliers will not carry dry fireclay. So I am stuck with Orcoset ($89 a 3 gal pale). Now the question is the base is supposed to be a mix of sand and fireclay to set the oven floor. Can I use this Orcoset for this?. Thanks for any insite.

Steve

Lburou 02-02-2012 07:21 AM

Re: Fireclay or Orcoset
 
Quote:

Originally Posted by HummerGB (Post 117241)
I knew I would be on here sooner or later that I would be on here with a question. This is a great forum. I just poured the insulating layer today, also tried to buy my fire clay and this is what I ran into. In Green Bay the three brick suppliers will not carry dry fireclay. So I am stuck with Orcoset ($89 a 3 gal pale). Now the question is the base is supposed to be a mix of sand and fireclay to set the oven floor. Can I use this Orcoset for this?. Thanks for any insite.

Steve

I found fireclay at two locations: A pottery store and a local refractory (hawthorne bond fireclay). :)


All times are GMT -7. The time now is 04:03 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC