Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Newbie Forum (http://www.fornobravo.com/forum/f2/)
-   -   another hearth question (http://www.fornobravo.com/forum/f2/another-hearth-question-18522.html)

jim81147 10-17-2012 07:59 PM

another hearth question
 
I have looked at alot of the builds here and one thing I notice is that not much time is spent on making sure the individual hearth bricks are flat with each other . Is this something that is not that important or is it just a boring but necessary step that does not make for exciting pictures :D Thanks.

deejayoh 10-17-2012 08:12 PM

Re: another hearth question
 
I assume you mean oven floor? I think people may spend a lot of time on it, but it's not such a sexy topic of conversation or photography. It's pretty easy to get them flat if you lay them on a sand/fireclay mix that has been grooved with a tile trowel, and tap them with a rubber mallet to set them. I found that its easier to do if the leveling mix is dry, vs. the recommendation to use it wet.

Les 10-17-2012 08:55 PM

Re: another hearth question
 
Jim,

It is very important to get them even. If not, the peel WILL hang up on an edge. I spent a fair amount of time sanding the brick down with a belt sander.


All times are GMT -7. The time now is 10:01 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC