Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (
-   Newbie Forum (
-   -   10" Tile saw (

hb2474 09-03-2010 11:18 AM

10" Tile saw
Is this big enought to cut firebricks?

AndrewL 09-03-2010 11:34 AM

Re: 10" Tile saw

Great for cutting bricks in half. Gets tricky if you want to taper bricks. It is possible but time consuming.

I used a 10" saw and used 3 tile blades for this oven,
which has many many tapers to most bricks. Next time I will use a 12" or even 14" saw.

SCChris 09-03-2010 01:04 PM

Re: 10" Tile saw
I built my oven with a 10 as well. Most of us, who built a brick oven, 95%, used a 10" saw. Others had the luxury of a 14", some others used 3" grinders and some even used only a chisel and hammer. HB you'll do fine with a 10 and unless you can find a real bargan on a 14 inch and the 10 isn't a huge bite out of your budget.


All times are GMT -7. The time now is 03:09 PM.

Powered by vBulletin® Copyright ©2000 - 2015, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC