Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Heat Management (http://www.fornobravo.com/forum/f17/)
-   -   Old fashion DialGauge readout for a K Type Thermocouple (http://www.fornobravo.com/forum/f17/old-fashion-dialgauge-readout-k-type-17914.html)

gaby 06-16-2012 12:04 PM

Old fashion DialGauge readout for a K Type Thermocouple
 
I have installed a couple K type Thermocouples in my oven with a Digital Readout
the Digital readout is ugly does not go well with the rustic oven look Has any one had success finding a Old fashion Dial Gauge readout for a K Type Thermocouple

david s 06-16-2012 05:43 PM

Re: Old fashion DialGauge readout for a K Type Thermocouple
 
I agree with you about the digital read out. They also have the disadvantage of having to be powered and they are prone to failure. I have a couple of old anologue read outs which I prefer. Because the current produced in the wires in the probe is directly proportional to the temperature, they require no power to operate. You may be able to score one from a potter as pretty much all systems today have gone to digital display.

gaby 06-16-2012 11:02 PM

Re: Old fashion DialGauge readout for a K Type Thermocouple
 
Thanks David I have been trying hard with no luck
Forno bravo store has one but not sure if it is a K type J Type or gas pressure type does any one knows here is the link
Remote Thermometer for Wood Oven :: Installation Accessories :: Forno Bravo Store


All times are GMT -7. The time now is 05:42 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC