Go Back   Forno Bravo Forum: The Wood-Fired Oven Community > Oven Management > Firing Your Oven

Like Tree2Likes

Reply
 
LinkBack Thread Tools Display Modes
  #21  
Old 07-22-2012, 02:05 PM
Master Builder
 
Join Date: Mar 2008
Location: Washington State USA
Posts: 780
Default Re: WARNING: about using Burner with Propane to Cure

Good link Shuboyje and like you said: cool read. The one hassle I can see with that gasifier is the need to use high quality charcoal. Charcoal used to be readily available in quanity at reasonable prices but today one would probably have that extra step...make the charcoal. There are no actual plans either, but the info is indeed educating.

I did find a site with pretty remarkable products. In a way it is sort of like this Forno Bravo site in that they offer free plans for DIY as well as kits and finished ready to run units. They even have a forum. GEK (Gasifier Experimenters Kit) is basically set up for electric power production (which is my interest) as opposed to powering vehicles.

Here are links which take one to their site with more or less present state of the art plans for free. Roaming around the site via tabs should answer most questions about generating useable gas using wood. Although I am a scrounge by nature and prefer to re-purpose already formed parts, they do offer a kit wherein all one has to do is weld and assemble precut pieces.

Just research at this point.

Home Gasifier Experimenters Kit

Build It Gasifier Experimenters Kit

Gasifier Systems and Kits Gasifier Experimenters Kit

Bests,
Wiley
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
insulating lid of propane grill? TylerDavis Traditional Grill Design 2 04-23-2013 08:51 AM
Heating with propane cedar56 Heat Management 11 04-05-2010 06:20 PM
Anxious to cure - is it time? Valan Pompeii Oven Construction 0 11-07-2008 12:22 PM
cure questions waynebergman Firing Your Oven 11 05-07-2008 05:09 AM
HELP! Can I cure and test oven before enclosing? Nick Pompeii Oven Construction 25 10-21-2007 03:41 PM


All times are GMT -7. The time now is 04:23 PM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC