Forno Bravo Forum: The Wood-Fired Oven Community

Forno Bravo Forum: The Wood-Fired Oven Community (http://www.fornobravo.com/forum/)
-   Forum Guidelines (http://www.fornobravo.com/forum/f14/)
-   -   storage heater bricks (http://www.fornobravo.com/forum/f14/storage-heater-bricks-18113.html)

hoss 07-23-2012 02:44 PM

storage heater bricks
 
hi new to the forum just wondering, has anyone built a dome from storage heater bricks?????? and great forum buy the way
:):)

Johnny the oven man 07-23-2012 08:01 PM

Re: storage heater bricks
 
Couldt see any problems, except for a bit of cutting perhaps. What size are they?

UtahBeehiver 07-24-2012 06:53 AM

Re: storage heater bricks
 
Hi Hoss,

There have been a couple UK builds that have used bricks from heaters. Should be able to do a search on UK or heater bricks.

hoss 07-30-2012 10:51 AM

Re: storage heater bricks
 
thanks guys sorry for late reply, they measure 9"x7"x2" i was going to cut them into 4 pieces, that would be not far off from being the dimensions of the end of a fire brick. i was going to lay them so the dome would be 2" thick then plus insulation and render, i was then going to cover it with beach stones around 1" thick will this be thick enough for heat retention ??????? cheers:):)

Faz 08-01-2012 03:40 AM

Re: storage heater bricks
 
I cut mine in half for the first few chains, then quarters and then finally sixths / eighths for the top parts of the dome. This gives roughly 4" thickness for the dome which gives plenty of heat retention.

If your bricks are like mine you can cut them in half so that there is a thicker section at one side, which you can use to help give you the angles you need for the dome. I reckon with my bricks the spacing would have been just about right for a 35" dome, though mine is 30 so I had to make the angle slightly larger and fill with home brew.


All times are GMT -7. The time now is 12:35 AM.

Powered by vBulletin® Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Search Engine Friendly URLs by vBSEO 3.6.0
2006/10 Forno Bravo, LLC