web analytics
New user from Florida - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

New user from Florida

  • Filter
  • Time
  • Show
Clear All
new posts

  • New user from Florida

    Anybody in the Central Florida area that has already built. I've got my base and insulating layer poured. I'm in the process of burning out a bunch of cutoff blades. I need to see if I can find an 6-8" blade so I don't have to cut 2 sides and have a real rough center.

  • #2
    Re: New user from Florida

    Range bob--I'm hoping to start one this fall in Dunedin, FL. How did you make out with permitting, our bldg dept is pretty hard nosed.

    Cutoff blades, I've had good luck cutting masonry and tile with a segmented diamond blade for a skil saw. They hold up well and are pretty cheap. You can even drizzle water on the cut to keep down the dust. Not sure how they'll work on firebrick.

    Keep on posting!



    • #3
      Re: New user from Florida

      Originally posted by rangebob View Post
      I need to see if I can find an 6-8" blade so I don't have to cut 2 sides and have a real rough center.
      I am not sure what you are using for a saw, but a diamond blade will pay for itself several times over vrs. cut off blades.
      joe watson

      "A year from now, you will wish that you had started today "

      My Build
      My Picasa Web Album


      • #4
        Re: New user from Florida

        I bought a wet saw on craigslist for $250, used it a lot, and sold it for $250 when I was done. Was a good saw and saved a lot of time and effort.
        Lee B.
        DFW area, Texas, USA

        If you are thinking about building a brick oven, my advice is Here.
        Our One Meter Pompeii Oven album is here.
        An album showing our Thermal Breaks is Here.

        I try to learn from my mistakes, and from yours when you give me a heads up.