web analytics
Imported WFO from Portugal - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Imported WFO from Portugal

  • Filter
  • Time
  • Show
Clear All
new posts

  • Imported WFO from Portugal

    Hi all,
    I'm a newbie and this will be my first post.
    I have tried a few searches on this subject but not coming up with anything relevant.

    Built a patio recently which is a work in progress. It desperately needs a pizza oven, and I have persuaded the wife that this is the case. The kids helped with these negotiations.
    Now I have done a lot of browsing on the subject, to the point that I am so full of internet info, I haven't a clue what's the best way to go.
    I work abroad, will be home in 3 weeks, for only 3 weeks, then away again.
    So I don't have a lot of time, but would like to get a working oven before I go away again. I can get some help with the base and have that done in a few days.
    Simplest solution is pre built WFO - but very pricey in general.
    But I have seen this on ebay...
    Brick Wood Fired Pizza Oven PIZZAIOLI Design 120Cm | eBay

    Imported from Portugal, exactly the style I want, and looks a decent deal.
    I'm waiting for response from seller regarding insulation and type of brick.
    Anyone got one, heard of them or got any comments?

  • #2
    Re: Imported WFO from Portugal

    http://www.fornobravo.com/forum/f43/...tml#post148953 I have a Portugese oven...Quite like the one you have asked about. I can tell you for a fact that you will have to insulate under and around the oven to acheive sustained cooking. I put 2" of CF board under the cement type platform and covered the dome with 3-4" of 1" roll insulation. I fired the oven a few times before I insulated it and I was underwhelmed. That said, now that it is insulated and walls and roof put around it , I am quite happy. Gets to 700-800 in about a hour on a arm load of oak and will remain hot for days. Without the insulation, you will use a lot of wood, and You may get some cracking, do to temperture variants in the oven and out side[ambiant] temp. I don't care what the guy in the add said...Don't care for the chiminey behind the door either...Your mililage may vary....cheers! P.S. In the process of building.. http://www.fornobravo.com/forum/f9/h...ite-19553.html
    Last edited by thickstrings; 07-31-2013, 04:18 PM.
    " Life is art, live a masterpiece"


    • #3
      Re: Imported WFO from Portugal

      As Thickstrings noted above, this design does work for pizza as long as there is insulation added. There is another thread that has an oven design much like the Portuguese oven you're looking at. The same insulation, vent location, and door issues are discussed. The link is below.


      I have a Pompeii style and bake mostly bread, roasts, ribs, chickens, etc. so I would not be able to use the Portuguese oven without several modifications. Primarily, I'd need to be able to close the oven with the door so the vent doesn't "leak" heat out of my baking chamber...and obviously make sure I had good insulation both top and bottom.

      Spend some time looking through the forum and associated photos...lots of good information here. Better to spend three weeks looking at your options and really asking yourselves..."What do I want to cook in it and for how many?" ...rather than buying something just because it's relatively inexpensive and you can put it in place quickly.
      Mike Stansbury - The Traveling Loafer
      Roseburg, Oregon ( www.sablesprings.com )
      Photo Albums: http://www.fornobravo.com/community/...BForum_Gallery


      • #4
        Re: Imported WFO from Portugal

        How do you patent a 4000 year old design?

        International patent
        The English language was invented by people who couldnt spell.

        My Build.



        • #5
          Re: Imported WFO from Portugal

          Originally posted by brickie in oz View Post
          How do you patent a 4000 year old design?

          International patent
          Hi Al,

          The same way you would Human Genes! Not the ones you wear, but the ones that wears you!


          • #6
            Re: Imported WFO from Portugal

            Thanks chaps for the replies.
            If I've got to purchase and fit a load of insulation, then render it, them modify the flue/door arrangement, it's not a cheap oven.
            Not had any reply from the seller regarding insulation or type of brick used, so assume it's a non-starter for me.
            I think I'll sit back for a while and wait 'till I have time to build one myself .
            At least I'll know how it's been put together.
            Definitely want the dome design though.


            • #7
              Re: Imported WFO from Portugal

              Artisan Ovens Construction of our wood fired ovens - YouTube Here is a video of a "Portugese" oven being built [the one I have]..There may be other places that build them in Portugal but I think they are are all the same. Notice there is NO insulation....just a little cladding and a lime wash.
              " Life is art, live a masterpiece"


              • #8
                Re: Imported WFO from Portugal

                Unfortunately, since I'm stuck offshore using satellite internet we are blocked access to youtube.
                I'll look at the video when I get home.
                I think the fact that my questions to the seller regarding insulation have no response after 2 weeks, despite chasing it up, are giving me a hint to steer away.
                It's good to have confirmation of this from here though.
                Stiil a nice looking oven though.


                • #9
                  Re: Imported WFO from Portugal

                  I have to say, that looks a little expensive - it seems that you're paying for the aesthetic finish which, as per the other comments, aren't worth a lot when you'll still have to insulate under and over.

                  I got my pre-cast for well under 400 delivered from France. (OK, it is about the smallest WFO on the market, with a 2' internal diameter.) Just be prepared to do a bit of building work!

                  PM me for details if you wish.

                  Last edited by cleverdick; 08-06-2013, 09:40 AM.