web analytics
refrectory cement for final plug - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse

I'm Peter Reinhart! Ask Me Anything! Monday, February 15, 2016 7:00-8:00 pm EST

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

Ask Me Anything New Forum Feature

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
See more
See less

refrectory cement for final plug

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • refrectory cement for final plug

    Having been working on my WFO for a few week now and I am getting close to closing the dome.
    Dome constructed from tapered fire bricks cut to shape and mortared with blackite.
    As we all know this is where things get a bit harder. Instead of cutting fire bricks for the final two rows I an interested to know if anyone has used a refractory cement cast over an internal sphere to plug the top of the dome.
    This seems an easier option than trying to cut and support fire bricks.
    As the new trend seem to be the use of precast domes over brick I would appreciate and comment on problems this type of closure would bring
    Thanks

  • #2
    Re: refrectory cement for final plug

    Can't see why it wouldn't work, but I reckon it wouldn't look so nice.
    What is blackite?

    Comment


    • #3
      Re: refrectory cement for final plug

      Originally posted by harriott View Post
      Having been working on my WFO for a few week now and I am getting close to closing the dome.
      Dome constructed from tapered fire bricks cut to shape and mortared with blackite.
      As we all know this is where things get a bit harder. Instead of cutting fire bricks for the final two rows I an interested to know if anyone has used a refractory cement cast over an internal sphere to plug the top of the dome.
      This seems an easier option than trying to cut and support fire bricks.
      As the new trend seem to be the use of precast domes over brick I would appreciate and comment on problems this type of closure would bring
      Thanks
      Your major drawback is that you'll have to buy a whole bag of the stuff which will cost you around $50/ 25 kg bag. Some suppliers will also have a minimum bag sale e.g. you may have to buy 12 bags of the stuff. The stuff also only has a shelf life of 12 months, less if stored in a moist atmosphere, so it will probably be useless by the time you want to use it again. Castable is also designed to be fired to around 1000C otherwise it will continually cycle through the 500 -650 C range at pretty fast rate especially as it's at the top of the dome it will see temperatures this high. Having said that complete ovens operate successfully using unfired cartable. It would certainly be easier and faster.
      Kindled with zeal and fired with passion.

      Comment


      • #4
        Re: refrectory cement for final plug

        I agree it could be done... but is it really hard to cut the bricks the right size for the top 2 rows? I actually found it easier the higher I went. You don't have to cut them very accurately and you can still use refractory cement to fill in the gaps. Personally I think that is easier than building the form to create the entire plug out of refractory.

        If you do go this route, however, please post pictures!

        Comment


        • #5
          Re: refrectory cement for final plug

          Hmmm

          Cut the brick. I made a plaster mould for mine and it worked a treat cutting it. Just make sure you line the hole with something to get the plug out.

          Got photos on my thread.
          Cheers Colin

          My Build - Index to Major Build Stages

          Comment


          • #6
            Re: refrectory cement for final plug

            Originally posted by wotavidone View Post
            Can't see why it wouldn't work, but I reckon it wouldn't look so nice.
            What is blackite?
            Thanks for the comments Guys.
            Think I will persist with using the fire bricks.
            Blackite is a cement/glue used for firebricks. Sold by Thermal ceramics it is great to work with but can only be used for up to 3mm thick so you need to have cut bricks or use sparingly at the face and then backfill all joints with the normal 3:1:1:1 mortar mix. Costs $60.00/ 20ltr but used correctly will build a 900mm dome.
            Cheers

            Comment


            • #7
              Re: refrectory cement for final plug

              Reality check, might help. I'm sure some of the adhesion is due to the mortar not being refractory but still...

              Impressively skilled brick layers, Vault contructión. - YouTube
              Last edited by Lancer; 02-03-2014, 08:28 PM.

              Comment

              Working...
              X