web analytics
Superwool - Adelaide - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 2 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
2 of 2 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
See more
See less

Superwool - Adelaide

  • Filter
  • Time
  • Show
Clear All
new posts

  • Superwool - Adelaide

    Hi All,

    Long time lurker, virgin poster

    I am nearly finished building my oven and bought a 'box' (7000x600mm roll) of 25mm Superwool from Thermal Ceramics. But I didn't get enough, and don't need another 'box' of it. Turns out I needed 5.6m2, not 4.2...yeah I am not good at Maths So I need approx another 1.4m2, assuming my maths is good


    Is there anywhere I can buy offcuts, or a smaller amount?

    Does anyone have any left over (in Adelaide)?

    Is there an alternative, such as using vermicrete where I don't have enough Superwool?



  • #2
    Re: Superwool - Adelaide

    Hi Dustin,

    I have a roll of Fibretek 650 blanket that I did not end up using all of. let me know dimensions of the piece you are after, and we will work something out.


    "All I ask is the chance to prove that money can't make me happy"

    Spike Milligan

    "It is only impossible if you stop and think about it"
    The Pirate Captain


    • #3
      Re: Superwool - Adelaide

      Hi Dustin and welcome aboard,
      I have an offcut of the 1" superwpool, full width and around 1100mm long together with a few smaller offcuts.
      I as up working at my son's new home in Hawthorndene today , but I am at Flagstaff Hill.


      Prevention is better than cure, - do it right the first time!

      The more I learn, the more I realise how little I know

      Neillís Pompeiii #1
      Neillís kitchen underway