web analytics
Ideas for Dome - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

Forum Issues Update

Things are progressing in getting things back in order on the Forum! User avatars should be showing up. Attachment and inline images are in the process of being uploaded. We are still looking for a migration path for the Photoplog gallery. Thank you for your patience!
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Ideas for Dome

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Ideas for Dome

    So I am in the process of building the dome myself...and did the solider and a couple of courses. I ran into a little duh moment. Everything on the forum shows things like forms for the dome and beach balls or yoga balls. I thought of something else and it actually works really nice. My dad and I stopped at the local pool store and bought one of those pool pillows for the winter. Stuffed into the oven and then started to blow it up. It works really well I thought I would share that I have a picture but having issues trying to upload my pictures to FB.

    Dino

  • #2
    Re: Ideas for Dome

    Seb,

    That was my initial plan was to use sand. Then I did not want to clean it up but it was the best option depending ont he size. I build my dome with a 40" diameter. The 48"x48" pillow which was I used fit perfectly inside and since I was building a low dow it was just enough to keep the vault the right shape rather than a full shere like shape. The pillow had a oval shape to it. I will try post a picture. It worked great for what I was trying to do. Sand for me although initially was good idea I could nto figure out how to keep it the same I want with some consistancy....
    Attached Files

    Comment


    • #3
      Re: Ideas for Dome

      dinoforno

      It will work, but you won't get the shape right unless it will be just OK.
      I would not use it but put up on bricks a plywood base (in pieces to remove through the oven entrance), put some 'damp sand' on it, sculpt it to shape and continue laying the bricks until finished. Once you get your keystone brick(s) in, then remove the ply and sand, crawl inside and clean up and adjust the bricks to make yourself proud of you dome.

      Neill
      Prevention is better than cure, - do it right the first time!

      The more I learn, the more I realise how little I know


      Neillís Pompeiii #1
      http://www.fornobravo.com/forum/f8/n...-1-a-2005.html
      Neillís kitchen underway
      http://www.fornobravo.com/forum/f35/...rway-4591.html

      Comment


      • #4
        Re: Ideas for Dome

        Seb,
        I need to figure out what should I put (or spray) on the sand to make it hard, like a crust.
        I believe someone on the forum said they painted their sand with regular latex paint ... expanding foam insulation is another option, You can spray, let it expand and dry, then sculpt to shape,
        Stuffed into the oven and then started to blow it up. It works really well I thought I would share that
        Hey dino, Cool Idea,,, If its working for you then its great.. dont over inflate and blow your seams apart...

        Cheers and welcome to you both and good luck in your build..
        Mark

        Comment


        • #5
          Re: Ideas for Dome

          "That's why I want to harden, bind the sand surface. "

          Do a 15:1 sand to portland mix (mix very well dry, then add a small amount of water) for the whole sand dome/form.

          This will hold the shape you want and will still be easy to chop out when done.

          Comment

          Working...
          X