web analytics
Angleizer required - Forno Bravo Forum: The Wood-Fired Oven Community

Announcement

Collapse
1 of 2 < >

New Forno Bravo Forum Feature

Forno Bravo Forum Community,

You will notice a new forum at the top of the main page called, "Ask Me Anything". This forum will be used for live one hour "Ask Me Anything" (AMA) sessions hosted by people who are knowledgeable in different areas pertaining to wood fired ovens. How it works:
- Each AMA will have a "sticky" thread where the community can post questions they would like answered during the live session. This will allow everyone to participate even if you can't be online for the live session. These questions will not be answered by the host until the live AMA; if you need an answer quickly, you should post it in the appropriate Forum area for the community to respond.
- Another thread will be posted for the live AMA. Registered users who are logged in during the live session can interact with the host by asking questions and receiving responses.
- The live thread will remain in the AMA forum to view after the session.

To kick off our AMA feature, we have invited author, chef and master bread maker and host of Pizza Quest, Peter Reinhart, to be our first host! Peter will be in the Forum on Monday, February 15th, from 7:00 - 8:00 pm EST. If you are unable to be online during the live session, you can post your questions in the sticky post. Peter will answer those questions during the live session on February 15th. You can view Peter's answers to your questions as well as what happened during the live session in the session thread.

We hope you enjoy this new feature! Please let us know if there is a topic that you'd like to have as an AMA and we'll look for a host!

Forno Bravo
2 of 2 < >

Dome Installation Video - Casa / Premio / Modena

Hello,

For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.

https://www.youtube.com/watch?v=-7q7...jSniYogfUra06Q

If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Angleizer required

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Angleizer required

    Just wondering if anybody can advise where I can purchase a Angleizer from in Sydney or if not Australia

    cheers

    John
    John
    __________________
    My Oven Thread:

    http://www.fornobravo.com/forum/f8/j...-wfo-7911.html

    The difference between a successful person and others is not the lack of strength, nor the lack of knowledge… but rather, the lack of will power.

  • #2
    Re: Angleizer required

    Grizzly.com -- Home

    I saw they have it and also have concrete mixers and a tile saw.

    Angle-Izer

    Grizzly.com -- Online Catalog

    Tile Saw

    Grizzly.com -- Online Catalog

    Concrete Mixer

    Grizzly.com -- Online Catalog

    Of course these may all be chaeper at HF...

    One stop shopping - hey James -- more items for the FB Store maybe ????
    Columbiana, Alabama WFO Build.

    http://www.fornobravo.com/forum/f3/o...bama-7837.html

    Comment


    • #3
      Re: Angleizer required

      John,
      here is a link:

      The Angle-Izer - General Tools & Instruments

      You can buy just as cheaply overseas and get the goods in around a week if you can't find the article here.
      Do a google search to find one in Australia

      Neill
      Prevention is better than cure, - do it right the first time!

      The more I learn, the more I realise how little I know


      Neill’s Pompeiii #1
      http://www.fornobravo.com/forum/f8/n...-1-a-2005.html
      Neill’s kitchen underway
      http://www.fornobravo.com/forum/f35/...rway-4591.html

      Comment


      • #4
        Re: Angleizer required

        Thanks guys

        I looked into them and yes they are well priced

        Sent one of them a message so will wait and see what they say

        cheers
        John
        __________________
        My Oven Thread:

        http://www.fornobravo.com/forum/f8/j...-wfo-7911.html

        The difference between a successful person and others is not the lack of strength, nor the lack of knowledge… but rather, the lack of will power.

        Comment


        • #5
          Re: Angleizer required

          $22 for angleizer but $96 del to australia

          Comment


          • #6
            Re: Angleizer required

            Masters here in australia has them for $$40

            Comment


            • #7
              what is the angleizer

              Comment


              • #8
                It is multipurpose ruler/template maker. Go to General Tool Company website to see. PS if you look earlier in the thread your question and link is answered.
                Last edited by UtahBeehiver; 09-29-2015, 03:34 PM. Reason: additions
                Russell
                Build Link............... Picassa Photo Album Link

                Comment

                Working...
                X