web analytics
7" Tile Saw - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 4 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 4 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
4 of 4 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

7" Tile Saw

  • Filter
  • Time
  • Show
Clear All
new posts

  • 7" Tile Saw

    Hi, I am getting close to bricking my oven and was wondering if this saw would do the job. The main thing I'm worried about is if the brick will fit under the blade while cutting. Thanks for any help


  • #2
    Re: 7&quot; Tile Saw

    I'm pretty sure this is the same as the MK 7" saw, just rebadged Husky. No it won't cut through a fire brick on one pass. I started out with an older MK 7" and actually went to the trouble of building a new rolling table that would just barely cut through the bricks before hitting the arbor.....then the bearings went out...so I bought a 10".
    Not sure in Harbor Freight exists north of the border or if import duties for you are too high, but for around $200 you get a pretty darned good 10" saw that will cut through fire brick in on pass.....like a hot knife through butter.



    • #3
      Re: 7&quot; Tile Saw

      There's a Harbor Freight store in Syracuse, NY - Not too far from Toronto. Like RT said, you would need to figure out what the duty would be or just hope they don't check your trunk.
      Ken H. - Kentucky
      42" Pompeii

      Pompeii Oven Construction Video Updated!

      Oven Thread ... Enclosure Thread
      Cost Spreadsheet ... Picasa Web Album


      • #4
        Re: 7&quot; Tile Saw

        Harbor Freight here in Rochester too and maybe Buffalo--saw is on sale for the next week or so and it does not look or work like a cheap unit. Diamond blade another $30 and together they really do a heck of a job. It is much heavier than I expected so my plan to use sawhorses on rough ground proved less appealing. I went back and paid the extra $40+ for the wheeled stand which also is deceptive in that it looks unsubstantial but is tight and right with the weight of the saw on it. The laser thermometer is also on sale for more than 50% off so you can get quite a bang for your buck. I sprang for the 2 year insurance under which they promise to replace either if they stop workig during the next two years.
        The only drawback so far--my wife realized it could cut bricks,slabs and stuff for the garden ! John


        • #5
          Re: 7&quot; Tile Saw

          Alright you guys convinced me. I'm going to Iowa next month for business, maybe we will just happen to drive past a harbor freight.

          Thanks for bringing me to my senses


          • #6
            Re: 7&quot; Tile Saw

            Don't worry. Everyting will be OK.