web analytics
Steel Frame & stucco Questions - Forno Bravo Forum: The Wood-Fired Oven Community


1 of 4 < >

Forum Page Loading Response

Forum Members:

We have received feedback regarding recent issues with page loading response time. We believe the slow response issue stems from the analytics we added with the new Forum. We are in the process of reconfiguring those elements and, after an approximate 24-hour time period for the reconfiguration to run, we anticipate a return to normal page load times. Thank you for your patience!
2 of 4 < >


Hello, Forno Bravo Community Forum members.

As many may have noticed already, the Community Forum site was briefly down today. While working on scheduled routine maintenance, we encountered an error when trying to add a software update. As the site is now back up and running, some of you may notice that some recent data has been misplaced from November 10th up to today. We are currently working on resolving the issue. The forum has full operational capabilities and we encourage all forum members to continue actively posting in the threads.

We apologize for any inconvenience that this issue may have caused you. The Forno Bravo family values each and every member of our community. If you have any issues or concerns, please feel free to let us know on our issues thread here:


Thank you for understanding.
3 of 4 < >

Forno Bravo Forum Thread Message

Hello, Forno Bravo Community Forum Members!

The Forno Bravo team has heard the feedback in regards to the community forum. We wanted to take the time to re-enforce our commitment to a fully engaged Forum with professional moderation.

Our top priority as a company is to fix all forum errors and issues that you are experiencing. As we are swiftly working on these problems, we want to say that we highly value the Forum Bravo Community Forum and every single community forum member.

We have set up this thread so that every member can address any concerns, issues and questions about the forum. Please feel free to ask whatever you would like in regards to the forum; let us know what issues you are experiencing so we can work on resolving them as fast as possible. However, we stress that we would like constructive engagement, so please be specific about the issue you are experiencing.

Thank you for all of your patience and continued support.

Link to topic: http://www.fornobravo.com/community/...with-new-forum
4 of 4 < >

Dome Installation Video - Casa / Premio / Modena


For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.

Check it out on our You Tube Channel.


If the link doesn't work, simply go to You Tube and type Forno Bravo Channel. The video title is How to Set your Forno Bravo Oven Dome Pieces.

Thanks for participating in our Forum. We will have more video content available soon.
See more
See less

Steel Frame & stucco Questions

  • Filter
  • Time
  • Show
Clear All
new posts

  • Steel Frame & stucco Questions

    I think I'm trying to set a record for slowest installation for a Casa100 oven...

    Anyway, is there a set of good pictures/plans of a gabled house enclousure in the steel framing stage? The pics in the manual are nice but they only show part of the roof complete. I'm especially interested in roof cross-bracing and how the angled roof meets the wall.

    Also. I'm planning on using hardibacker & stucco on the walls. Should I make it so that the hardibacker is even with the concrete block base on the walls so that the stucco comes out even? Or does one kind of surface need a different amount of stucco/prep layer?

  • #2
    Re: Steel Frame &amp; stucco Questions


    Spend some time looking through the photo gallery and searching the threads. It will give some ideas.

    Several have posted photos of the steel framing in various stages, which should help. Here are some:

    Daren: http://www.fornobravo.com/forum/21/h...o-4194-18.html

    Ken: http://www.fornobravo.com/forum/f21/...sure-3002.html

    Dino: http://www.fornobravo.com/forum/f8/d...arts-5883.html

    Bill: http://www.fornobravo.com/forum/f8/b...oven-5927.html

    Breven: PhotoPlog - Uploads Posted By Breven

    as well as my own.

    That should give you a start. If you have specifics, feel free to ask.
    Mike - Saginaw, MI

    Picasa Web Album
    My oven build thread