If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
1 of 2<>
Forum Issues Update
We are continuing to work diligently to resolve the issues currently being experienced with the PhotoPlog. Thank you for your patience!
2 of 2<>
Dome Installation Video - Casa / Premio / Modena
For many of you who bought a modular oven, you may have asked how we put the domes together when we build them. For those of you considering one of our ovens, we shot a video to make your install easier.
I have read alot about different mortars but have only found one reference to using smoothset, any thoughts?? I can source it locally and it seems to be less expensive than HS50 although still higher than making your own
I used the thermal ceramics brand refractory mortar. I have no idea if the bag said "smoothset," however. If it's the same product, I found it easy to work with. I did seem to have more cracks than the average build, but not very big ones, and that could have been entirely my skill with mortar and the arid Phoenix conditions.